This document provides you an overview how to install/configure etc. MiniSAP WAS 610.
MiniSAP 610 Installation
Introduction
Overview of process
Starting Installation
After Installation
Logon to SAP
Installing SAP DB Database Manager
Imports
Starting SE80
Setting up HTML help
Setting up TMS
Quick system check
Changing menu start picture
NLS Problem
Saposcol
SAP DB SQL Studio
Problem with DB02
New users
Kernel Change
Importing correction and examples
Licensing
Enlarging Database
LSMW
Work Process
ST03
Trouble shooting
Hints
Exceptions
Appendices
Problems, open items
Related documents
Introduction
MiniSAP 610 is a SAP Web Application Server 610 with only basis level without application modules. It’s ideal for ABAPers and Basis consultants to get familiar with the WAS environment.
Overview of process
System requirements:
a) Windows 2000 or Windows XP
b) Internet Explorer 5.01 or higher
c) at least 192 MB RAM
d) at least 512 MB paging file
e) at least 3.2 GB disk space
Installation was started with:
f) Windows 2000 Professional with Service Pack 3.
g) Internet Explorer 6.0.2800.1106
h) 256MB RAM
i) Paging file settings: initial 512MB max 1024MB.
j) 12GB disk free space
Checks before the installation:
1. The fileC:\WINNT\system32\drivers\etc\services (Windows 2000) must not include an entry for port 3600.
2. No SAPDB must be installed on your PC.
3. The hostname of the PC must not be longer than 13 characters.
4. The Network must be configured for installation.
Starting Installation
5. Logon to Windows 2000 with administrator rights.
6. Insert the Mini SAP Web Application Server KERNEL CD (CD50050239_1).
7. Start
8. Choose 'Open' within the File Download Window popup.
9. Within SAPSetup, enter the target directory (Default: C:\MiniWAS).
Make sure you have enough free space (>= 3.0 GB) in this directory.
10. Confirm/enter the CD drive for both the KERNEL and the DATA CDs.
11. Enter the target drive for SAP DB database software (Default: C:\).
12. Installation is quite CPU intensive procedure.
13. After about 10 minutes running insert the Mini SAP Web AS System DATA CD (50057886).
14. After 20 minutes
15. Press Exit.
After Installation
16. After successfully installation you can find a ‘Start SAP WA1’ shortcut on your desktop. There is the same shortcut in your start menu Start Menu\Programs\Mini SAP Web AS.
17. Double-click the Start SAP WA1 icon to start the database and the SAP System.
18. Stopping:
Cancel and close the Start SAP WA1 window with CTRL-C. (This only stops the SAP System but not the database.)
19. Starting and Stopping the database seperately:
Within the start menu (Programs -> Mini SAP Web AS) , you can find entries to start and stop the database.
20. After system startup the memory usage can be 670-700MB.
Logon to SAP
21. Add to your SAPGUI the following entry
22. The logon screen looks like this:
23. Usually you log on as BCUSER. BCUSER is already registered as a developer for the Mini SAP Web AS. With the user DDIC, you can perform administration tasks.
24. After you logged on you already have some favorites…in german:-)
25. In the menu you can see only the Tools part available, there is no menu for Application modules.
Installing SAP DB Database Manager
In general, it is not necessary to perform any administrative tasks on the database. Exceptions could be enlarging the database, making backups, or changing database parameters. For each of these situations, you should use the SAP DB Database Manager, which is delivered on the Kernel CD. You must install this tool yourself.
26. Insert KERNEL CD
27. Start the setup program
28. Press next when it is necessary.
29. The installation takes only a few minutes.
30. After starting the SAP DB Database Manager (Start -> Programs -> SAP DB -> Database Manager) for the firrst time, you have to register your database. To do this, choose File -> Register in the Menu, specify the entry for the server where your database is running, mark the database WA1, press the 'Register' button, and enter the username and password of the Database Manager Operator (User name = 'control', Password = 'control'). Close the registration window. Now you can perform all administrative tasks with the SAP DB Database Manager for Web Application Server Demo Version.
Imports
31. It’s recommended that setup TMS now and import corrections package now, before creating own transport request. See chapter Setting up TMS and Importing correction and examples.
Note: This document describes the step in order I did … so it wasn’t the best order:-(
Starting SE80
32. If you start se80, the default.html BSP application is coming up.
Setting up HTML help
33. Copy Data CD\Htmlhelp to your local drive. E.g. C:\MiniWAS\Htmlhelp
34. In SAP start transaction SR13.
35. Press enter for information message ‘Caution: The table is cross-client’.
36. Select the HtmlHelpFile tab.
37. Change the path to C:\MiniWAS\Htmlhelp.
38. Press Save button.
39. In the ‘Prompt for Workbench request’ pop-up press the ‘Create button’.
40. Enter short description.
41. Press Save button.
42. Press Enter in the request button.
43. You can test the HTML help with Help-> Application help.
44. It didn’t work for me… I’ve mistyped the location. But now it’s OK.
Setting up TMS
45. Logon as DDIC.
46. You also have favorites, when you log on.
47. Call transaction SE38 and execute program ZR3_TMS_CONFIG.
48. For pop-up ‘Start deletion of CTS tables? Make a backup of the system beforehand’ choose Yes.
49. For pop-up ‘Start deletion New initialization of CTS required’ choose Yes.
50. It takes a few minutes. You will get the following log:
Changing profile
51. Start transaction RZ10.
52. Follow menupath Utilities-> Import profiles-> Of active servers.
53. You will get a nice log with full of error messages….
54. Go back to the selection screen and select profile WA1_D00 Instance.
55. In extended mode press the change button.
56. Change the value of rdisp/wp_no_btc from 0 to 1. This is the number of the background processes.
57. Press the copy button than go back to the selection screen.
58. Press the Save button.
59. For the pop-up ‘Incorrect parameter values detected. Display values?’ No.
60. ‘Do you want to activate the profile?’ Yes.
61. ‘Profile WA1_D00 (version 000002) saved and activated’. Enter.
62. You will get a ‘Caution! Message’.
63. To check the effect start transaction SM50. As you can see you only have 2 dialog workprocess.
64. Log off and restart the server.
65. The shut down log look like this.
66. Logon as DDIC.
67. Start transaction sm50 to check the work processes. As you can see there is a background job (BGD).
68. Execute program RDDNEWPP (transaction SE38), which schedules the background job RDDIMPDP within the WA1 system.
69. Press enter to the message ‘Transport system …’
70. Choose Normal in the priority pop-up.
71. To check this job start transaction sm37.
72. Start transaction STMS.
73. Enter description for the Transport Domain and save it.
74. Error message ‘Errors occurred during distribution of tp configuration’ Enter.
75. ‘Transport profile TPPARAM contains entries for system WA1’ Cancel.
76. Go to System Overview.
77. Double click on the system.
78. Navigate to the Transport tool tab.
79. Go to change mode.
80. Extras-> Copy configuration from TPPARAM.
81. Save and distribute. Check will fail in this stage.
82. Go back to the initial screen.
83. Press the transport routes button.
84. In change mode follow the menu path Configuration -> Standard configuration -> Single system.
85. Create a transport layer.
86. Save and distribute your configuration.
87. In the system Overview SAP system-> Create -> Virtual System
88. In the system overview SAP System->Check-> … Perform all the 3 kind of check. All of them should be OK.
89. You may have to refresh it several times because of the time-out problems.
90. In the initial screen of TMS all the error message is disappeared now.
Transport on OS level
91. To export or import transport requests, use the transport program tp as follows:
92. Open a DOS-box and change to the WA1 directory (C:\MINIWAS, for example).
93. Run the command file dbenv.cmd to set the environment variables for the database connection.
94. Start the transport program tp directly with tp pf=trans\bin\TP_DOMAIN_WA1.PFL
Quick system check
95. Start transaction sm21 for checking system log. In the first start press ‘Continue’ to the ‘This instance was entered in TSLE4’ “Warnung” message:-))
96. Check st22 for short dumps.
97. Check sick ‘no application server offers an ENQ service’.
98. sm50, sm04, st11, st02, st04, db12, db02, sm12, sm13 are fine.
99. st06 requires saposcol
100. st03 gives a short dump
101. db02 gives an error message: “MONI has 1 entries with key --ADABAS Dmissing idx”
102.
Changing menu start picture
103. Start SE80.
104. Create a Package.
105. Start SMW0.
106. Select Binary application radio button
107. Press Find.
108. Press Execute.
109. Settings -> Maintain MIME types.
110. Create an entry with MIME type: image/gif Name extension: *.gif
111. Go back to the SAP Web Repository: Object Display screen
112. Press the create button.
113. Enter Obj. Name and description.
114. Import a nice picture…. and enjoy SAP:-)
NLS Problem
During startup there is a message in the Start SAP WA1 command prompt log: “Database table TCPDB empty. Guessing! See note 42305”
I’ve started report RSCPINST, but I couldn’t activate the codepage, since parameters install/codepage/db/non_transp and install/codepage/db/transp were not set. In rz11 the value was ‘sapparam.c: Don't use’…so I didn’t use….
During next startup there was no such message anymore…I’ve checked TCPDB, and a new entry was created for 1100.
Saposcol
In st06 when I tried to check the parameters, all of them was zero, the saposcol wasn’t running. I’ve tried started manually, but in windows level it terminated. I’ve downloaded the latest 620 version ‘COLL 20.77 02/05/06 620’, I’ve overwritten the old one (after rename it) and started manually. It seems that it works fine now. In windows level it wasn’t registered as a service.
Since Saposcol doesn’t start automatically, I’ve modified runWA1.cmd like this:
REM =====================================================
REM Set the Environment for the DB Connect
REM =====================================================
set DBMS_TYPE=ada
set PATH=%PATH%;C:\sapdb\programs\bin;C:\sapdb\programs\sap;C:\sapdb\programs\pgm
REM =====================================================
REM Start the Database (SAP-DB)
REM =====================================================
cmd /c strdbsWA1.cmd
REM =====================================================
REM Start the SAPOSCOL
REM =====================================================
start /B saposcol -l
REM =====================================================
REM Start SAP System
REM =====================================================
rem del pxastat
start /B msg_server.exe pf=WA1_D00.pfl
disp+work.exe break pf=WA1_D00.pfl
Unfortunately it logs the following…but it’s not a big problem:
open logfile '\\w2000-inotaip\saploc\PRFCLOG\dev_coll.tmp' failed... try path =
[C:\DOCUME~1\INOTAIP\LOCALS~1\Temp\dev_coll.tmp]
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
[EnumInstances] SAPPdhEnumObjectItems( LogicalDisk ) failed with c0000bb8
[EnumInstances] SAPPdhEnumObjectItems( LogicalDisk ) failed with c0000bb8
[EnumInstances] SAPPdhEnumObjectItems( LogicalDisk ) failed with c0000bb8
******************************************************************************
* This is Saposcol Version COLL 20.77 02/05/06 620 - 20.38 NT 03/04/07
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
Starting collector (create new process)
******************************************************************************
SAP DB SQL Studio
I’ve installed SAPDB Sql studio, it’s available in the kernel cd, but I couldn’t connect to the DB with control/control….I’ve created a new user, but I’ve got the same message, when I tried to logon.
Problem with DB02
When I tried start transaction DB02 I’ve got an error message:
I’ve executed report RSDB_TDB, which took a few minutes. This report didn’t provide any log….but after it DB02 was fine.
New users
New user can be created in SU01. Just copy BCUSER to a new one. A developer key is valid for BCUSER, but for new user use 29671482393151224771. Somehow it didn’t work for me….
I’ve checked sap* is not deactivated, so logon with sap*/pass is possible….
Kernel Change
Based on OSS note 502999 WAS 610 is able to run with Kernel 610. I wasn’t sure about which version to download: Unicode/non-unicode. In OSS 544623 and 548016 it’s described how to convert database to Unicode, so I decided not to convert to Unicode.
After I’ve downloaded the WAS 620 Non-unicode NT/I386 kernel and unpacked them my WAS didn’t start.
There was an error in the dev_w0 log file:
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.2204.pct
C *** ERROR => Get of the precompiler version failed : sqlcode=-888 (Could not load libpcr (7.3.1-.))
[dbslada.c 4837]
B ***LOG BY2=> sql error -888 performing CON [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY0=> Could not load libpcr (7.3.1-.) [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY2=> sql error -888 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> Could not load libpcr (7.3.1-.) [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1119]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8534]
I’ve found OSS 557227, which describes how to import/register Precompiler Runtime for SAP DB.
1. Download from marketplace SAPDB->SAPDB OLTP-> SAPDB 7.3
2. Stop WAS and DB
3. Open a command prompt.
4. Enter: “dbcli dbm_getpath indepprogpath”
5. For me it was :
C:\>dbmcli dbm_getpath indepprogpath
OK
C:\sapdb\programs
6. Unpack the package from there.
7. It will create directory 7301 in C:/sapdb/programs/runtime/7301
8. Register the library with the following command: “irconf -i -p C:\sapdb\programs\runtime\7301”
9. The result was the following:
C:\sapdb\programs>irconf -i -p C:\sapdb\programs\runtime\7301
C:/sapdb/programs/runtime/7301 -> 7.3.1.0 registered.
10. Start DB and WAS
11. The system was very slow, it compiled at the first logon/transaction starts.
12. The result can be check in System->Status-> Kernel
Finally I’ve decided to keep the old kernel, since the system gave me a SICK short dump every log on…because of the missing ENQ process. In the system log there was a lot of message about Buffer reorganization and invalid load format….
SICK error
I’ve reseted the old kernel, but then I’ve got the “Invalid load format”, probable now it had format for 6.20.
It was strange that the old kernel used the old db library…
Finally I’ve decided to try again after checking OSS Note 5470, 185745 and 162991.
I’ve changed WA1_D00.pfl file based on OSS 5470:
rsts/ccc/cachesize = 1000000
to
rsts/ccc/cachesize = 6000000
After changing this parameter “Reorganized Buffer” message didn’t appear anymore. I’ve tried to avoid “Invalid load format” message with SGEN generation, but it was so slow…I gave it up….
Also the generation increased the size of the database….
Next startup everything was fine…
Importing correction and examples
There is a correction available from SAP-PRESS for correcting the problem of creating classes in the customer namespace. Another request available in the install cd for importing the sample examples of the ABAP Object book.
1. Unpack ‘MiniWas_Correction01.zip’
2. Copy K900002.WA1 to
3. Copy R900002.WA1 to
4. Unpack ‘Example_Transport.zip’.
5. Copy K8A0H5B.B20 to
6. Copy R8A0H5B.B20 to
7. Logon as DDIC.
8. Start transaction STMS.
9. Press the ‘Import Overview’.
10. Double click on ‘WA1’.
11. You might have to refresh it several times if you get a connection error.
12. I’ve got timeout error several times:-(((
13. Extras -> Other request -> Add
14. WA1K900002
15. Yes.
16. Extras -> Other request -> Add
17. B20K8A0H5B
18. Yes.
Finally I did it on OS level with tp command. I had problems that I already had a request with name WA1K900002…I’ve renamed the request on OS level.
I imported B20K8A0H5B first. Import failed with the following error:
2EEPU161 Program "S_ITAB_ACCESS": Syntax error in line "000060"
2EEPU164 "You cannot specify the component 'TABLE_LINE' for""a generic line type in the current statement. allo"
C:\MiniWAS\trans\bin>dbenv.cmd
C:\MiniWAS\trans\bin>REM =====================================================
C:\MiniWAS\trans\bin>REM Set the Environment for the DB Connect
C:\MiniWAS\trans\bin>REM =====================================================
C:\MiniWAS\trans\bin>set DBMS_TYPE=ada
C:\MiniWAS\trans\bin>set PATH=C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\PROGRA~1\IBM\CLIENT~1;C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\PROGRA~1\IBM\CLIENT~1\Emulator;C:\PROGRA~1\Symantec\pcAnywhere\;C:\PROGRA~1\SAP\FrontEnd\Controls\;;C:\MiniWAS;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\sapdb\programs\sap;C:\sapdb\programs\bin;C:\sapdb\programs\sap;C:\sapdb\programs\pgm@
C:\MiniWAS\trans\bin>tp pf=TP_DOMAIN_WA1.PFL showbuffer WA1
This is tp version 320.56.75 (release 620)
WA1 buffer:
TASK |PROJECT |P|CMD I |DD Im |Activ |MainI |MC Ac |ADO I |VersF |XPRA |Gener |UMODE|TAGS
--------------------+--------------------+-+------+------+------+------+------+------+------+------+------+-----+----
B20K8A0H5B | | |1 |6 |6 |1 | | |127 | |115 | |
that makes 1 transport to be imported.
tp finished with return code: 0
meaning:
Everything OK
C:\MiniWAS\trans\bin>tp pf=TP_DOMAIN_WA1.PFL addtobuffer WA1K900077 WA1
This is tp version 320.56.75 (release 620)
Addtobuffer successful for WA1K900077
tp finished with return code: 0
meaning:
Everything OK
C:\MiniWAS\trans\bin>tp pf=TP_DOMAIN_WA1.PFL showbuffer WA1
This is tp version 320.56.75 (release 620)
WA1 buffer:
TASK |PROJECT |P|CMD I |DD Im |Activ |MainI |MC Ac |ADO I |VersF |XPRA |Gener |UMODE|TAGS
--------------------+--------------------+-+------+------+------+------+------+------+------+------+------+-----+----
B20K8A0H5B | | |1 |6 |6 |1 | | |127 | |115 | |
WA1K900077 | | |1 | | |1 | | |2 | |2 | |
that makes 2 transports to be imported.
tp finished with return code: 0
meaning:
Everything OK
C:\MiniWAS\trans\bin>tp pf=TP_DOMAIN_WA1.PFL import B20K8A0H5B WA1
This is tp version 320.56.75 (release 620)
This is R3trans.exe version 6.09 (release 620 - 04.07.03 - 10:00:00).
R3trans.exe finished (0004).
This is R3trans.exe version 6.09 (release 620 - 04.07.03 - 10:00:00).
R3trans.exe finished (0004).
tp finished with return code: 8
meaning:
A tool used by tp produced errors
C:\MiniWAS\trans\bin>
Importing B20K8A0H5B ended with an error:
After import package S_ABAP_BOOK is available in the repository. It seems report S_ITAB_ACESS has a syntax error, which caused the problem during the import. May be this program demonstarates the syntax check:-)…I’ve checked on 46C this syntax was still ok.
Renaming WA1K900002 to WA1K900077 didn’t work, the import failed.
I’ve changed back the name and import it (on os level) and it was fine:
I’ve checked the version of one of the imported object…it showed the import date:
I’ve checked the requests ans I’ve seen request WA1K900002 was completely overwritten…so I recommend to do this import before creating any request.
Licensing
You can extend your license with requesting a new license key. To install the license key:
19. Logon to the system as DDIC.
20. Start transaction SLICENSE.
21. Press the install button.
22. Enter the license key. You can see here your Hardware Key.
23. If you send this key to SAP they will send you a license key immediately.
I don’t know why, but on SAP level I always got an error message, so I couldn’t install it….so I’ve tried on OS level, and it worked.
C:\MiniWAS>saplicense -show
LICENSE system: MBS hardware key: TEMPLICENSE expiration_date: 20020809
installation no: INITIAL key: O98ZY6MRKRCJRUXOQOLTLW58
userlimit: 0 productid: R3_ADA
system-nr: INITIAL_SYSTEM_IDX
*** license expired ***
LICENSE system: WA1 hardware key: TEMPLICENSE expiration_date: 20030814
installation no: INITIAL key: HOZTCS3MGTGACLWOQCI249KU
userlimit: 0 productid: R3_ADA
system-nr: INITIAL_SYSTEM_IDX
*** license useable ***
C:\MiniWAS>saplicense -get
saplicense: HARDWARE KEY = F1500206791
C:\MiniWAS>saplicense -install
Specify your SAP System ID:
SAP SYSTEM ID = WA1
Specify your unique System idenfification:
If you have no systemnumber specified just press enter.
SYSTEM-NR =
Set unique System-ID to INITIAL_SYSTEM_IDX
Specify your hardware key:
HARDWARE KEY = F1500206791
Specify your installation number:
INSTALLATION NO = DEMOSYSTEM
Specify your expiration date:
EXPIRATION_DATE [YYYYMMDD] = 20031030
Specify your license key:
LICENSE_KEY 1...5....0....5....0...4
LICENSE_KEY = CYEKCGJDFDBIALSLOM7AYBMT
saplicense: License successfully installed
C:\MiniWAS>saplicense -show
LICENSE system: MBS hardware key: TEMPLICENSE expiration_date: 20020809
installation no: INITIAL key: O98ZY6MRKRCJRUXOQOLTLW58
userlimit: 0 productid: R3_ADA
system-nr: INITIAL_SYSTEM_IDX
*** license expired ***
LICENSE system: WA1 hardware key: TEMPLICENSE expiration_date: 20030814
installation no: DEMOSYSTEM key: 2ZBFICJN4NV4CJIBECURFO3H
userlimit: 0 productid: R3_ADA
system-nr: INITIAL_SYSTEM_IDX
*** license useable ***
LICENSE system: WA1 hardware key: F1500206791 expiration_date: 20031030
installation no: DEMOSYSTEM key: CYEKCGJDFDBIALSLOM7AYBMT
userlimit: 0 productid: R3_ADA
system-nr: INITIAL_SYSTEM_IDX
*** license useable ***
I still couldn’t register a new user as a developer, but I had to register BCUSER with Developer key ‘29671482393151224771’.
Enlarging Database
After the kernel change my db was almost full, so I’ve added another data file. You have the possibility to add two additional data file.
1. Start SAP database Manager.
2. Navigate to Configuration tab -> Data Devspace.
3. Double click on ‘DATA0003’.
4. You can change the size, location and the type of the new datafile.
5. Press enter.
The enlargement takes only a few minutes.
LSMW
1. Download LSMW for WAS 610 from the marketplace.
2. Unpack the file in the trans directory. It will create one file in the data, one file in the cofile dir.
3. Change to the trans\bin dir.
4. Add to the buffer:
C:\MiniWAS\trans\bin>tp pf=TP_DOMAIN_WA1.PFL addtobuffer B5TK000652 WA1
5. Import the request:
C:\MiniWAS\trans\bin>tp pf=TP_DOMAIN_WA1.PFL import B5TK000652 WA1
It takes about 10 minutes.
6. Create an LSMW>CMD file in the bin dir with the following content:
import
client cascade = yes
file = 'c:\MiniWAS\trans\data\R000652.B5T'
including 'R3TRTABU'
including 'R3TRTDAT'
7. Perform the following command to distribute the Authorization profiles:
C:\MiniWAS\trans\bin>R3trans -u 1 LSMW.CMD
It takes less then a minute.
8. Reset the buffer using the following command in the command field:
/$SYNC
9. Add one of the following profiles to your user master record:
You can start LSMW with transaction code LSMW. You will got the following Welcome message first time:
Work Process
I’ve activated the ENQ and the UPD process, since they don’t need too much memory resource. At startup they need about 6M each, but later the memory usage was about 600K for each of them.
At least I haven’t got any short dump at startup at least….in SICK the SPO process is still missing….
The only problem that I’ve got an error message in the development trace files, that there are too many process.
I’ve tried to activate SPO process, too. SICK was fine that time, but there were errors in the spool process development trace, so I’ve deactivated it.
Tuning, Profile changes
I’ve changed PHYS_MEM from 64 to 128. The system paged more than before, so I changed back it.
I’ve changed DIR_HOME = from ‘.’ To ‘.\work’ and created this dir…..the traces were created to this dir….but the system halted after startup. In the dev_disp:
*** DP_FATAL_ERROR => Gateway could not be started - I better exit now
*** DISPATCHER EMERGENCY SHUTDOWN ***
***LOG Q05=> DpHalt, DPStop ( 2376) [dpxxdisp.c 7982]
ST03
In the Miniwas dir there are many stat file, but I cannot see them in ST03, I’ve got the following pop-up and a MESSAGE_TYPE_UNKNOWN abap short dump. I think it’s a programming error, but I couldn’t find any relevant OSS note.
Trouble shooting
Not known.
Hints
a) Do the correction request import before creating any new request.
b) Installation parameter can be influenced with modifying file
Exceptions
Appendices
Problems, open items
a) Processes: how it is possible to perform update without UPD process?
b) Processes: which process should I activate?
c) Parameters: PHYS_MEM value seems too low (64MB), but increasing this value would cause performance problem…
d) New client: Normally it’s recommended not too touch client 000. Since it’s a demo system and I don’t want to enlarge the db, I will use client 000.
e) SPAM/Packages: It would require extra space…
f) Unicode: How can I activate Unicode? => It would need extra resource (CPU, memory, dbspace)
g) ZTTA/DEFTITLE: normally this parameter defines the title of the logon screen…it didn’t work for me.
h) Dev key????
i) CFOLDERS: What is cfolders?
j) How can I maintain HTTP users? -> Theoretically SICF, but I couldn’t find the entry for BCUSER.
k) How can I administer/monitor ICM?
l) Problem with st03?
m) SQL-studio connection?
n) Why SAPOSCOL is not a service?
o) Why there is no SAPMMC for SAP?
p) Why there is no user created on OS level?
q) Sending email from WAS? (SAPConnect SMTP)
r) Java Engine as an Add-on for WAS610?
s) Installing HTTPS?
t) “unknown” hostname in the BSP pages?
u) Preview in BSP pages…no picture is shown, scripts are wrongly shown.
v)
Related documents
OSS Notes:
OSS Note 502999 Installing a 6.20 kernel into a system with 6.010 Web AS
OSS Note 557227 Importing the 7.3.01 Precompiler Runtime
OSS Note 42305 PSCPINST (NLS installtion tool)
OSS Note 548016 Conversion to Unicode /Unicode System Copy
OSS Note 554623 Unicode Installation
OSS Note 5470 SysLog E14: Buffer RSCPCCC … is being reorganized
OSS Note 185745 Kernel upgrade 46A/46B/46C/46D: --> Mass generation
OSS Note 162991 Generation tools for ABAP program
No comments:
Post a Comment